Your cart is currently empty!

ISO 21984:2018
ISO 21984:2018 Ships and marine technology – Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
CDN $115.00
Description
ISO 21984:2018 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on board ships satisfying one or both of the following conditions:
a) 2-stroke cycle, long-stroke, low-speed diesel engine directly coupled to the fixed-pitch propulsion propeller is installed.
b) length of deck house (L) is limited as compared with its height (H) (i.e. deck house of around 1,0 and above in slenderness ratio of H to L). An example of length of deck house (L) and its height (H) for slenderness ratio is shown in Annex A.
Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guidance values for different spaces on ships.
ISO 21984:2018 is applicable to specific ships with intended voyages of 24 h or more.
ISO 21984:2018 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.
This document is not applicable to machinery spaces, other than engine control rooms, where persons do not stay for prolonged periods of time.
ISO 20283‚Äë5 is generally applicable to all ships. Requirements for measurement, evaluation and reporting of vibration with regard to habitability for all persons on board passenger and merchant ships, including specific ships to which this document may also be applicable can be found in ISO 20283‚Äë5. This document is neither complementary nor additional but supplementary to ISO 20283‚Äë5. The shipbuilder can select either this document or ISO 20283‚Äë5 to apply to any specific ship upon due consideration to individual design conditions of the ship and, if any, experience in building sister or similar ships, and that particular selection is intended to be agreed on by the shipowner.
The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‚Äë1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‚Äë2.
Edition
1
Published Date
2018-02-02
Status
PUBLISHED
Pages
10
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment

Abstract
ISO 21984:2018 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on board ships satisfying one or both of the following conditions:
a) 2-stroke cycle, long-stroke, low-speed diesel engine directly coupled to the fixed-pitch propulsion propeller is installed.
b) length of deck house (L) is limited as compared with its height (H) (i.e. deck house of around 1,0 and above in slenderness ratio of H to L). An example of length of deck house (L) and its height (H) for slenderness ratio is shown in Annex A.
Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guidance values for different spaces on ships.
ISO 21984:2018 is applicable to specific ships with intended voyages of 24 h or more.
ISO 21984:2018 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.
This document is not applicable to machinery spaces, other than engine control rooms, where persons do not stay for prolonged periods of time.
ISO 20283‚Äë5 is generally applicable to all ships. Requirements for measurement, evaluation and reporting of vibration with regard to habitability for all persons on board passenger and merchant ships, including specific ships to which this document may also be applicable can be found in ISO 20283‚Äë5. This document is neither complementary nor additional but supplementary to ISO 20283‚Äë5. The shipbuilder can select either this document or ISO 20283‚Äë5 to apply to any specific ship upon due consideration to individual design conditions of the ship and, if any, experience in building sister or similar ships, and that particular selection is intended to be agreed on by the shipowner.
The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‚Äë1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‚Äë2.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 80004:2021 Nanotechnologies – Vocabulary – Part 6: Nano-object characterization
0 out of 5CDN $76.00 Add to cart -
ISO 15424:2025 Information technology – Automatic identification and data capture techniques – Data carrier identifiers (including symbology identifiers)
0 out of 5CDN $233.00 Add to cart -
ISO 2382:2015 Information technology – Vocabulary
0 out of 5CDN $0.00 Add to cart -
ISO 8384:2019 Ships and marine technology – Dredgers – Vocabulary
0 out of 5CDN $76.00 Add to cart