Your cart is currently empty!
“ISO 9514:2019 Paints and varnishes – Determination of the pot life of multicomponent coating systems – Preparation and conditioning of samples and guidelines for testing” has been added to your cart. View cart
ISO 8130:2019
ISO 8130:2019 Coating powders – Part 11: Inclined-plane flow test
CDN $76.00
Description
This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal.
The aim of the test method described in this document gives an indication of the degree of melt flow that can occur during the curing of the coating powder. This characteristic contributes to the surface appearance and to the degree of coverage over sharp edges.
The test is a comparative method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected.
This method is not suitable for coating powders which have gel times of less than 1 min at the test temperature when characterised according to ISO 8130‚Äë6. This method is also not suitable for textured powders.
Edition
2
Published Date
2019-04-01
Status
PUBLISHED
Pages
5
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This document specifies a comparative method for determining the flow characteristic of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal.
The aim of the test method described in this document gives an indication of the degree of melt flow that can occur during the curing of the coating powder. This characteristic contributes to the surface appearance and to the degree of coverage over sharp edges.
The test is a comparative method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected.
This method is not suitable for coating powders which have gel times of less than 1 min at the test temperature when characterised according to ISO 8130‚Äë6. This method is also not suitable for textured powders.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 3233:2019 Paints and varnishes – Determination of percentage volume of non-volatile matter – Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes’ principle
CDN $173.00 Add to cart -
ISO 1518:2023 Paints and varnishes – Determination of scratch resistance – Part 1: Constant-loading method
CDN $115.00 Add to cart -
ISO 11890:2024 Paints and varnishes – Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content – Part 1: Gravimetric method for VOC determination
CDN $173.00 Add to cart -
ISO 22970:2019 Paints and varnishes – Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
CDN $233.00 Add to cart
